Measuring Gauges
Digital Welding Gage
Cat # 18
With LCD display, will hold either the zero setting or measured value at any position for differential measurements
Adjustable Fillet Weld Gage
Cat # 3
Unequal Leg Measurement Feature
Measure Fillet Weld & Weld Throat Thickness, Available in Standard or Metric
Automatic Weld Size Weld Gauge
Cat # 6
For Accurate Calibration of Butt Fillet Type Welds, Available in Standard or Metric
Bridge Cam Gage
Cat # 4
The following measurements are possible in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, Weld Throat Size, and more
Combination 0″ – 10″ Dial/Pit Depth Gauge
Cat # 13
Accuracy Meets or Exceeds Federal Specs, Available in Standard or Metric
Economy Single Purpose Hi-Lo Welding Gage
Cat # 2
Eliminates Rejects – Improves Productivity, Available in Standard or Metric
HI-LO Welding Gage
Cat # 1
Measures Internal Alignment, New Slim Design Is 30% Lighter
“Mini Sub” Socket Weld Gauge
Cat # 14
Check Throat Dimensions, Checks All Pipe Schedule, All Stainless Steel
Pit Depth Gage
Cat # 5a
Undercuts/Pits to 1/2 Inch by 1/32 Inch Increments. Check Undercuts/Pits, Porosity, All Stainless Steel
Pipe Pit Gage
Cat # 17
Range is 0 to 1/2″ in 1/64″ & .020 Increments, Arm Can be Locked in Place at Any Dimension, All Stainless Steel, Available in Standard or Metric
Pocket Bridge Cam Gauge
Cat # 4a
Check Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, and more
Skew-T Fillet Weld Gauge
w/ Calculator
Cat # 9c
Check Angle of Vertical Member, Weld Acute Side, Weld Obtuse Side, Available in Standard or Metric
“V-WAC” Single Weld Gage
Cat # 5
Undercuts/Pits to 1/4 Inch, Crowns to 1/4 Inch by 1/64 Inch Increments. Check Undercuts/Pits, Porosity, Crowns, All Stainless Steel
“V-WAC” Single Weld Gage
Cat # 5d
Undercuts/Pits to 0.240, Crowns to 0.240 by 0.020 Increments. Check Undercuts/Pits, Porosity, Crowns, All Stainless Steel
“V-WAC” Single Weld Gage
Cat # 5m
Undercuts/Pits to 6mm, Crowns to 6mm by 0.5mm Increments. Check Undercuts/Pits, Porosity, Crowns, All Stainless Steel
Pit Gage
Cat # 5f
Undercuts/Pits to 0-2mm by 0.2mm Increments. Check Undercuts/Pits, All Stainless Steel
Pit Gage
Cat # 5g
Undercuts/Pits to 0.08″, Crowns to 0.04″ by 0.005″ Increments. Check Undercuts/Pits, Crowns, All Stainless Steel